switch gear - перевод на арабский
Diclib.com
Словарь ChatGPT
Введите слово или словосочетание на любом языке 👆
Язык:     

Перевод и анализ слов искусственным интеллектом ChatGPT

На этой странице Вы можете получить подробный анализ слова или словосочетания, произведенный с помощью лучшей на сегодняшний день технологии искусственного интеллекта:

  • как употребляется слово
  • частота употребления
  • используется оно чаще в устной или письменной речи
  • варианты перевода слова
  • примеры употребления (несколько фраз с переводом)
  • этимология

switch gear - перевод на арабский

EQUIPMENT ENABLING THE SWITCHING ON OR OFF OF PORTIONS OF AN ELECTRICAL NETWORK
Switch gear; Switch Cubicle; Remote switch operator; Vacuum switchgear; Metalclad switchgear; Gas-insulated switchgear; Cubicle switchgear; Air-insulated switchgear; Air insulated switchgear; Gas insulated switchgear; Controlgear
  • Cutaway model of an oil-filled high-voltage circuit breaker

switch gear         
قضيب مسنن
toggle switch         
  • 100px
  • Snapshot of switch bounce on an [[oscilloscope]]. The switch bounces between on and off several times before settling.
  • 100px
  • 100px
  • A toggle switch with four inputs and outputs
  • Opened [[float switch]] of a dirty-water pump
  • archive-date=2017-12-24 }}</ref> that is suited for incandescent loads.
  • Bank of toggle switches on a [[Data General Nova]] [[minicomputer]] front panel
  • A toggle switch in the "on" position
  • A three-deck stacked rotary switch. Any number of switching elements may be stacked in this manner, by using a longer shaft and additional spacing standoffs between each switching element.
  • 100px
  • 100x100px
  • 100px
  • A high-voltage disconnect switch used in an electrical substation. Such switches are used mostly to isolate circuits, and usually cannot break load current. High-voltage switches are available for the highest transmission voltages, up to 1&nbsp;million volts. This switch is gang-operated so that all three phases are interrupted at the same time.
  • Three push button switches (Tactile Switches). Major scale is inches.
  • Toggle switches with the shared cover preventing certain forbidden combinations
  • braking]] purposes. Here the switch is shown in the open position.
ELECTRICAL COMPONENT THAT CAN BREAK AN ELECTRICAL CIRCUIT
Switches; Electric switch; Toggle switch; On-off switch; On-off-on switch; Normally closed; Normally open; DPDT; Rocker switch; Keybounce; Electrical switch; Power switch; Load switch; Changeover switch; Four-way switch; On button; DPST; Ideal switch; Practical switch; Contact bounce; Toggle button; Switch bounce; Debouncing; Debounce; DPDT switch; SPDT switch; SPST switch; DPST switch; Dual switching system; Dual Switching System; Make-before-break; Make before break; Break-before-make; Break before make; Electromechanical switch; Spring-return toggle switch; Power switching; Push Button Switch; Momentary switch; Spring-return Toggle Switch; Footswitch; Positive on-off switch; DPCO; Contact terminology; In-line switch; Single pole, single throw; Single-pole, single-throw; Single pole, double throw; Single pole, change over; Single pole, triple throw; SPTT; Double pole, single throw; Dpst; Double pole, double throw; Double pole, triple throw; Double pole, change over; Single pole, quadruple throw; Single pole, quad throw; Double pole, quadruple throw; Double pole, quad throw; DPQT; Single-pole, change over; SP1T; 1PST; 1P1T; SP2T; 1PDT; 1P2T; SP3T; 1PTT; 1P3T; SP4T; 1PQT; 1P4T; 1PCO; 2PCO; DP1T; 2PST; 2P1T; DP2T; 2PDT; 2P2T; 2PTT; 2P3T; DP4T; 2PQT; 2P4T; Momentary open; Momentary closed; Triple pole, single throw; TP1T; 3PST; 3P1T; Triple pole, double throw; TPDT; TP2T; 3PDT; 3P2T; Triple pole, triple throw; TPTT; TP3T; 3PTT; 3P3T; Triple pole, quadruple throw; Triple pole, quad throw; TPQT; TP4T; 3PQT; 3P4T; Triple pole, change over; 3TCO; Quadruple pole, single throw; Quad pole, single throw; QPST; QP1T; 4PST; 4P1T; Quadruple pole, double throw; Quad pole, double throw; QPDT; QP2T; 4PDT; 4P2T; Quadruple pole, triple throw; Quad pole, triple throw; QPTT; QP3T; 4PTT; 4P3T; Quadruple pole, quadruple throw; Quad pole, quad throw; QPQT; QP4T; 4PQT; 4P4T; Quadruple pole, change over; Quad pole, change over; QPCO; 4PCO; Single pole; Double pole; Switch bounce reduction; Cold contact (switch); Hot contact (switch); Double-pole; Single-pole; Single-pole switch; Tumbler switch; Line switch; Level switch; Foot switch; Single pole, centre off; Single pole, changeover; SPCO (switch); Single pole, change-over; Reversing switch; Polarity-reversing switch; Reverse polarity switch; Electric pole reverser; Electric pole reverser switch; Electric pole reversing switch; Pole reverser; Pole reverser switch; Pole reversing switch; Polarity switch; Polarity reversing switch; Reversed polarity; Polarity switching; Polarity reversion
مفتاح كهربائى مفصلى مفتاح كهربائي مفصلي
power switch         
  • 100px
  • Snapshot of switch bounce on an [[oscilloscope]]. The switch bounces between on and off several times before settling.
  • 100px
  • 100px
  • A toggle switch with four inputs and outputs
  • Opened [[float switch]] of a dirty-water pump
  • archive-date=2017-12-24 }}</ref> that is suited for incandescent loads.
  • Bank of toggle switches on a [[Data General Nova]] [[minicomputer]] front panel
  • A toggle switch in the "on" position
  • A three-deck stacked rotary switch. Any number of switching elements may be stacked in this manner, by using a longer shaft and additional spacing standoffs between each switching element.
  • 100px
  • 100x100px
  • 100px
  • A high-voltage disconnect switch used in an electrical substation. Such switches are used mostly to isolate circuits, and usually cannot break load current. High-voltage switches are available for the highest transmission voltages, up to 1&nbsp;million volts. This switch is gang-operated so that all three phases are interrupted at the same time.
  • Three push button switches (Tactile Switches). Major scale is inches.
  • Toggle switches with the shared cover preventing certain forbidden combinations
  • braking]] purposes. Here the switch is shown in the open position.
ELECTRICAL COMPONENT THAT CAN BREAK AN ELECTRICAL CIRCUIT
Switches; Electric switch; Toggle switch; On-off switch; On-off-on switch; Normally closed; Normally open; DPDT; Rocker switch; Keybounce; Electrical switch; Power switch; Load switch; Changeover switch; Four-way switch; On button; DPST; Ideal switch; Practical switch; Contact bounce; Toggle button; Switch bounce; Debouncing; Debounce; DPDT switch; SPDT switch; SPST switch; DPST switch; Dual switching system; Dual Switching System; Make-before-break; Make before break; Break-before-make; Break before make; Electromechanical switch; Spring-return toggle switch; Power switching; Push Button Switch; Momentary switch; Spring-return Toggle Switch; Footswitch; Positive on-off switch; DPCO; Contact terminology; In-line switch; Single pole, single throw; Single-pole, single-throw; Single pole, double throw; Single pole, change over; Single pole, triple throw; SPTT; Double pole, single throw; Dpst; Double pole, double throw; Double pole, triple throw; Double pole, change over; Single pole, quadruple throw; Single pole, quad throw; Double pole, quadruple throw; Double pole, quad throw; DPQT; Single-pole, change over; SP1T; 1PST; 1P1T; SP2T; 1PDT; 1P2T; SP3T; 1PTT; 1P3T; SP4T; 1PQT; 1P4T; 1PCO; 2PCO; DP1T; 2PST; 2P1T; DP2T; 2PDT; 2P2T; 2PTT; 2P3T; DP4T; 2PQT; 2P4T; Momentary open; Momentary closed; Triple pole, single throw; TP1T; 3PST; 3P1T; Triple pole, double throw; TPDT; TP2T; 3PDT; 3P2T; Triple pole, triple throw; TPTT; TP3T; 3PTT; 3P3T; Triple pole, quadruple throw; Triple pole, quad throw; TPQT; TP4T; 3PQT; 3P4T; Triple pole, change over; 3TCO; Quadruple pole, single throw; Quad pole, single throw; QPST; QP1T; 4PST; 4P1T; Quadruple pole, double throw; Quad pole, double throw; QPDT; QP2T; 4PDT; 4P2T; Quadruple pole, triple throw; Quad pole, triple throw; QPTT; QP3T; 4PTT; 4P3T; Quadruple pole, quadruple throw; Quad pole, quad throw; QPQT; QP4T; 4PQT; 4P4T; Quadruple pole, change over; Quad pole, change over; QPCO; 4PCO; Single pole; Double pole; Switch bounce reduction; Cold contact (switch); Hot contact (switch); Double-pole; Single-pole; Single-pole switch; Tumbler switch; Line switch; Level switch; Foot switch; Single pole, centre off; Single pole, changeover; SPCO (switch); Single pole, change-over; Reversing switch; Polarity-reversing switch; Reverse polarity switch; Electric pole reverser; Electric pole reverser switch; Electric pole reversing switch; Pole reverser; Pole reverser switch; Pole reversing switch; Polarity switch; Polarity reversing switch; Reversed polarity; Polarity switching; Polarity reversion
مبدلة تيار

Определение

switch-hitter
¦ noun
1. Baseball an ambidextrous batter.
2. N. Amer. informal a bisexual person.
Derivatives
switch-hitting adjective

Википедия

Switchgear

In an electric power system, a switchgear is composed of electrical disconnect switches, fuses or circuit breakers used to control, protect and isolate electrical equipment. Switchgear is used both to de-energize equipment to allow work to be done and to clear faults downstream. This type of equipment is directly linked to the reliability of the electricity supply.

The earliest central power stations used simple open knife switches, mounted on insulating panels of marble or asbestos. Power levels and voltages rapidly escalated, making opening manually operated switches too dangerous for anything other than isolation of a de-energized circuit. Oil-filled switchgear equipment allows arc energy to be contained and safely controlled. By the early 20th century, a switchgear line-up would be a metal-enclosed structure with electrically operated switching elements using oil circuit breakers. Today, oil-filled equipment has largely been replaced by air-blast, vacuum, or SF6 equipment, allowing large currents and power levels to be safely controlled by automatic equipment.

High-voltage switchgear was invented at the end of the 19th century for operating motors and other electric machines. The technology has been improved over time and can now be used with voltages up to 1,100 kV.

Typically, switchgear in substations is located on both the high- and low-voltage sides of large power transformers. The switchgear on the low-voltage side of the transformers may be located in a building, with medium-voltage circuit breakers for distribution circuits, along with metering, control, and protection equipment. For industrial applications, a transformer and switchgear line-up may be combined in one housing, called a unitized substation (USS). According to the latest research by Visiongain, a market research company, the worldwide switchgear market is expected to achieve $152.5 billion by 2029 at a CAGR of 5.9%. Growing investment in renewable energy and enhanced demand for safe and secure electrical distribution systems are expected to generate the increase.